One-step fabrication of eco-friendly multi-functional amphiphobic coatings for cellulose-based food packaging.

Plastic and fluorine-containing oil and water resistant packaging materials have been gradually replaced by non-toxic and harmless bio-based materials because of their hazard to environment and human health. In this study, chitosan/carnauba wax emulsions (CS/CWs) were firstly prepared by one-step and used as oil and water resistant coating for cellulose-based food packaging paper. The impacts of emulsion components on stability of the emulsions and barrier performance of the coated paper were investigated. The results showed that the viscosity, particle size and polydispersity index of the emulsions were greatly dependent on the concentration of CS and CW, and the coated paper had the best comprehensive performance in water and oil resistance when the concentration of CS was 3 % and the amount of CW was 90 % of the total solid content (CS3/CW90). The particle size of CS3/CW90 was in the range of 0.5-0.7 µm, and the Cobb60 value, water contact angle and the kit ratings of paper coated with CS3/CW90 achieved 7.5 g/m2, 130.9° and 12/12, respectively, and the coated paper also exhibited excellent thermal stability and high antibacterial rate of 99.1 %, demonstrating its great potential for application in multi-functional food packaging.

Chitosan-graft-poly(lactic acid)/CD-MOFs degradable composite microspheres for sustained release of curcumin.

The solubility of cyclodextrin metal-organic frameworks (CD-MOFs) in aqueous media making it not suitable as sustained-release drug carrier. Here, curcumin-loaded CD-MOFs (CD-MOFs-Cur) was embedded in chitosan-graft-poly(lactic acid) (CS-LA) via a solid-in-oil-in-oil (s/o/o) emulsifying solvent evaporation method forming the sustained-release composite microspheres. At CS-LA concentration of 20 mg/mL, the composite microspheres showed good sphericity. The average particle size of CS-LA/CD-MOFs-Cur (2:1), CS-LA/CD-MOFs-Cur (4:1) and CS-LA/CD-MOFs-Cur (6:1) composite microspheres was about 9.3, 12.3 and 13.5 µm, respectively. The above composite microspheres exhibited various degradation rates and curcumin release rates. Treating in HCl solution (pH 1.2) for 120 min, the average particle size of above microspheres reduced 28.19 %, 24.34 % and 6.19 %, and curcumin released 86.23 %, 78.37 % and 52.57 %, respectively. Treating in PBS (pH 7.4) for 12 h, the average particle size of above microspheres reduced 30.56 %, 26.56 % and 10.66 %, and curcumin released 68.54 %, 54.32 % and 31.25 %, respectively. Moreover, the composite microspheres had a favorable cytocompatibility, with cell viability of higher than 90 %. These composite microspheres open novel opportunity for sustained drug release of CD-MOFs.

Multiphasic lignocellulose-based suspension for oil-water interfacial stabilization: Synergistic adsorption and phase behavior.

This study described the multiphasic and multi-sized lignocellulose-based suspension (LBS) prepared by green method and its adsorption and phase behavior at O/W interface. The LBS consisting of lignin containing microfibrils (LMFs), lignin containing cellulose nanofibers (LCNFs), and lignin nanoparticles (LNPs), was obtained by mechanical fibrillation and high-shear treatments. They had different functions in emulsion stabilization: (1) synergistic irreversible adsorption of LCNFs and LNPs limited the coalescence of droplets and formed micro-sized droplets; (2) droplets filled in the LMFs network creating a strong fiber-droplet network structure. The fluorescent micrographs confirmed the synergistic irreversible adsorption of LCNFs and LNPs on the surface of the droplets, which was conductive to the high interfacial stability. The droplets were deformed rather than being destroyed under the high flow speed. The increasing viscosity, improving gel-like behavior, decreasing creep compliance and increasing yield stress demonstrated that the internal droplets can support the fiber network to delay the destruction under shear force. And the fiber-droplet network can automatically regenerate in situ after completed destruction.

Pickering emulsion stabilized by cellulosic fibers: Morphological properties-interfacial stabilization-rheological behavior relationships.

This work aimed to study the stabilization mechanism induced by different morphologies of cellulosic fiber in O/W emulsion. Three types of cellulosic fibers were named squashed cellulose, incompletely nanofibrillated cellulose, and completely nanofibrillated cellulose, respectively. Squashed cellulose acted as barriers between the droplets to stabilize emulsion via depletion flocculation, whereas incompletely nanofibrillated and completely nanofibrillated cellulose formed covering layer via interfacial adsorption and connected adjacent droplets to create the droplet-fiber network structure via bridging flocculation. Differently, completely nanofibrillated cellulose formed the denser covering layer leading to a more stability of droplet. Importantly, it had the higher capacity of bridging flocculation, which can tightly connect the adjacent droplets to form a stronger droplet-fiber 3D network structure. Consequently, in rheological analysis including creep compliance, and dynamic modulus, the corresponding emulsions showed excellent anti-deformation ability and dynamic stability. This study provides practical guidance on the productions of foodstuff and cosmetic.

Lignin containing cellulose nanofibers (LCNFs): Lignin content-morphology-rheology relationships.

This study aims to investigate the relationship between lignin content, morphology, and rheology of lignin containing cellulose nanofibers (LCNFs). The morphology and rheology of LCNFs were dominated by lignin content. Lignin content had two-sides on mechanical fibrillation. At high lignin content (23.79 %), reduced efficiency of defibrillation resulted in large LCNFs connecting with lignin patches. LCNF suspensions exhibited low viscosity, weak gel behavior due to infirm fibril network. Small yield stress of 1.14 Pa suggested that fibril network was easily disrupted. At residual lignin of 6.52 %, fibril bundles were sensitive to defibrillation, producing long and flexible LCNFs with high capacity of entanglement. The entangled fibril network had high viscosity and strong gel like behavior. Creep compliance of 0.09 Pa-1 and large yield stress of 4.25 Pa indicated excellent resistance to deformation. The desired rheology can be tailored by lignin content, providing practical guidance on novel rheology-dependent LCNF based materials.

Strong In-Plane Magnetic Field-Induced Reemergent Superconductivity in the van der Waals Heterointerface of NbSe2 and CrCl3.

A magnetic field is generally considered to be incompatible with superconductivity as it tends to spin-polarize electrons and breaks apart the opposite-spin singlet superconducting Cooper pairs. Here, an experimental phenomenon is observed that an intriguing reemergent superconductivity evolves from a conventional superconductivity undergoing a hump-like intermediate phase with a finite electric resistance in the van der Waals heterointerface of layered NbSe2 and CrCl3 flakes. This phenomenon merely occurred when the applied magnetic field is parallel to the sample plane and perpendicular to the electric current direction as compared to the reference sample of a NbSe2 thin flake. The strong anisotropy of the reemergent superconducting phase is pointed to the nature of the Fulde-Ferrell-Larkin-Ovchinnikov (FFLO) state driven by the strong interfacial spin-orbit coupling between NbSe2 and CrCl3 layers. The theoretical picture of FFLO state nodes induced by Josephson vortices collectively pinning is presented for well understanding the experimental observation of the reemergent superconductivity. This finding sheds light on an opportunity to search for the exotic FFLO state in the van der Waals heterostructures with strong interfacial spin-orbit coupling.